Jwin JVTV2040 5.5" B/W Monitor with 1 B/W Infrared Camera and 1 60 Ft Cable at Wireless Hut .com

Jwin JVTV2040 5.5" B/W Monitor with 1 B/W Infrared Camera and 1 60 Ft Cable Condition: New
Manufacturer ID: jv-tv2040
Manufacturer Name: Jwin

The JWIN JVTV2040 is a low cost security system consisting of a 5.5"" B/W monitor, 1 B/W CCD camera and 1 60 ft cable. This single cable carries video and power, making it quick and easy to install. The monitor will accept a second camera for system expansion and supports auto switching of 2-20 second intervals between cameras. The camera features an integrated, adjustable lens and uses an array of built-in infrared LEDs to record in near total darkness.

Key Features

Easy to Install
The camera attaches to the monitor using the supplied 60 ft cable carrying video and power, making for quick and easy installation.

Accepts an Additional Camera
The monitor accepts an additional camera for expanding the system. Switching between cameras can be set at 2-20 second intervals using a dial on the monitor's right panel. The monitor features an A/V out port for simultaneously outputting the A/V signal of one camera to a recording device.

Infrared Illumination
The camera uses an array of built-in infrared LEDs to see in near complete darkness, offering 24-hour surveillance monitoring.

Signal System NTSC (EIA)

Picture Tube 5.5"" B/W

Channels 2

Display Modes Full screen with sequential switching

Connectors Video In: 4-pin DIN x2 (video, audio, power)
Video Out to Recorder: 4-pin DIN x1 (video, audio, power)

Dimensions (WxHxD) 8.2 x 6 x 7.6"" (20.8 x 15.2 x 19.3cm)

Weight 2.8 lb (1.3 kg)

Camera

Signal System NTSC (EIA)

Image Sensor B/W CCD

Resolution 380 Lines

Lens F=3.6

Minimum Illumination 0 Lux with infrared LED
0.5 Lux without infrared LED

Connector 4-pin DIN (video, power)

Power Requirements 12 VDC (via supplied cable)

Dimensions (WxHxD) 2 x 2.3 x 1.5"" (without stand)
50.8 x 58.4 x 38.1mm